Magic Mirror Manual
How to change poster?
Step.1: Push a side all the clamps located at back
side of the mirror.
Step.2: Open the mirror, take out the poster inside.
Step.3: Insert the new advertisement poster.
Step.4: Close the mirror and plug it to electricity.
How to revise the exchange
option? (Poster to mirror, or
mirror to poster)
Step.1: Turn off the power / disconnected with
electricity.
Step two: Press the Reveser button at the
bottom of the mirror. £¨To change back, press
this button again.£©
Step three: Close and lock the mirror before
connected to electricity.
Power
Reveser
Adjustable ***ective Distance:
The ***ecting distance can be
adjusted between 0.2m ~ 2m, just as you
like.
Stept.1: Open the mirror, and look
at the small hole on the bottom frame.
Stept.2: Use the mini screw ( in
blue color attached inside package ) to
put onto this small hole, and turn
clockwise or anticlockwise to achieve
your required ***ective distance.
3. Close the mirror to test if the
distance is accepted. If not, repeat
above step to make again.
***ective distance adjuster
Sensor
|
Home
